The amazing RRampMeter designed for model railroaders
does what no other meter can do!
RRampMeter Ver I MSRP $59.95
| Options |
| |
RRampMeter Ver II MSRP $89.95
RRampMeter Ver III MSRP $99.95
RRampMeter Ver IV MSRP $119.95
Easy walk-around measurements of layout voltage drops,
accurate booster output setup to optimum voltages for decoders and
sound units.
- The only inexpensive device that accurately measures
DCC Volts/Amps.
- Also measures AC and DC Volts/Amps.
- Rated at 10 or 20 Amps, costs less than DVMs that
cannot measure DCC.
- Measures true RMS Volts/Amps, +/- 2%.
- Suitable for all scales.
- No batteries required for DCC.
- Designed for Left/Right-hand use.
- PCB length 5.63"; Enclosure length 4", width 2",
height 1.25"
- 3 Styles Available:
- Version I RRampMeter Circuit Module without enclosure
(Fig. 2)
- Version II RRampMeter with Enclosure and Clip Leads
(Fig. 3)
- Version III RRampmeter Same as II. with Battery backup
for measurements below 7 Volts
- Version IV RRampmeterHP
Same as III but for large Scale high voltage and current
applications:
DCC: 38.6 v and 18-20 Amps
AC: 27.6 v and 18-20 Amps
DC: 38.6 v and 18-20 Amps
Fig. 1 - Panel Mount Fig. 2 - Direct Contact
Voltmeter shown
without enclosure.
Fig. 3 - Current Meter- Test or Clip Leads (Fig. 3) can also be used
for other applications.
- Test Leads or Layout Wiring can be conveniently
connected to the rear screw/socket terminals (not shown).
- Designed as a portable troubleshooting tool or
as a panel-mount meter (Fig. 1).